How much do you know about these technical points of relaxation test machine? - [Information]

The relaxation test machine is mainly used to measure the relaxation and extension performance of time, and can provide people with corresponding performance data of objects. However, if the test machine wants to operate normally and ensure efficient relaxation test of objects, there are several technical points that need to be paid attention to. How much do you know about these technical points of the relaxation test machine?

1. Structural framework

Because the relaxation test of objects is a long-term test, and the duration of the experiment will be as high as 100 hours, the relaxation test opportunity works for a long time under high load conditions, which puts forward strict requirements on the strength of the equipment itself.

If the body strength is not enough, it will cause disintegration during operation, affecting the normal progress of the measurement work. The structural framework of the slack tester must be stable and can withstand long-term high loads.

2. Force measurement system

The measurement of the relaxation of objects is mainly done by force sensors for induction measurement, which needs to ensure that the force sensor of the equipment can still maintain high accuracy during long-term relaxation tests. Therefore, the performance of the force measurement system has a direct impact on whether the test function can operate efficiently.

3. Servo motor

After the relaxation test machine performs a relaxation test on objects, it is necessary to maintain the equipment operation stability and cannot have severe vibrations. Therefore, the selection of servo motors in the equipment has a very important impact on the operation of the equipment.

The servo motor needs to have an efficient transmission mechanism and low noise generation, which requires smooth operation and no lag, ensuring that the slack test machine can operate normally and stably.

4. Deformation sensor

The test process of the relaxation ability of the relaxation test machine to maintain the shape of the test piece itself, measure the pattern of changing stress over time, and obtain the performance data related to the test piece.

Some specimens have very small deformation ranges, and all have extremely high requirements for deformation sensors. It is necessary to be able to perform real-time dynamic measurements of very slight deformations of the specimen.

5. Fixture

The performance of the fixture directly affects whether the specimen can be clamped firmly, because during the test, greater stress will be generated. If the quality of the fixture is not high enough, it is easy to cause the specimen to fall and affect its normal measurement process.

The above are the technical key points of the relaxation test machine, and how much do you know? The structural frame, force measurement system, servo motor, deformation sensor, and fixture have a very important impact on whether the slack test machine can be used normally. If you have any questions during use, you can call our service hotline through the web page, and our technicians will answer them one by one. Welcome to call and support!