Site and environmental requirements for installing high and low temperature test chambers

When you buy a new high and low temperature experimental box, the important thing is to install this equipment when you receive it. Due to different models and sizes, the high and low temperature experimental box determines the space for placement. Therefore, the installation site and surrounding environment have certain requirements. In order not to install various situations when installing equipment, the green decomposition technology level will be improved. I will give you a brief explanation of the installation site requirements and environment.

Installation site for high and low temperature experiment boxes: the ground is flat and well-ventilated. There is no strong vibration around the equipment. It can be used to print the experimental results. It can be installed as close to the power supply.

Environmental conditions: Temperature: 5℃～+28℃ (average temperature within 24 hours ≤28℃), relative humidity: ≤85%RH, gas Zhang Liyu's pressure: 86kPa～106kPa;

Power supply conditions: 3-phase 4-wire + protective ground wire, AC380 (±10%) V/50HZ;

PS: During installation, the equipment inclination angle cannot exceed 15℃, and appropriate space for use and protection should be left around the equipment;

I believe everyone has a preliminary understanding of the above instructions for installing high and low temperature experimental boxes.