Do a good job in the test of the tensile test machine from 9 aspects

According to national regulationsTension testerIn order to ensure the accuracy of the experimental results and to be related to the performance of the equipment operation, our company proposed that the following needs to be done before the tensile performance test of the tensile performance of the tensile test machine is9Inspection work:

1. Execution of the beam operation of the tensile tester: the beam is running normally; all speeds are running smoothly; the running distance is overshoot; belt and tension.

2. Overall inspection of the tensile tester: including in an environment with low room temperature and relative humidity; the tensile tester is properly installed; there is no corrosive medium around it; the power supply voltage fluctuates greatly; the main unit must be grounded.

3. Strain system inspection: Calibration and re-zero of the extensometer: Measure standard length.

4.Tension testerNecessary checkpoints for the control panel: panel display function and key function

5. Space inspection of tensile testing machine: tensile, compression, limited space: effective spacing of test machine

6. The load system of the tensile tester must be checked: whether the sensor appearance is damaged.

7. Tension tester transmission system inspection: motor noise

8. Inspection of accessories, such as fixtures, instruction manuals, software manuals, certificates of conformity, packing lists, random tools, etc.

9. Safety performance check of tensile tester: overload protection function; automatic shutdown of sample pull

In addition, in order to ensure the accuracy of equipment inspection results and the stability of operating performance, please do a good jobTension testerdaily maintenance work can greatly extend the service life of the equipment.