4 questions about authenticity of pluggable force testing machine

Jinan isTesting machineManufacturing base, but with the development of technology, counterfeit products have gradually emerged in the testing machine industry. The following is an analysis of four issues regarding the counterfeiting of tensile testing machines.

1. Checking whether there is protection when opening the software is entered is a foolproof measure. Even human operation errors will not damage the load element;

2.Testing machinePasswords must not appear during verification. If a password appears, the supplier must provide the password before acceptance can be accepted. The last time the curver customer said that the supplier had to pay the full payment before providing the verification password, which was actually the opposite. You should provide a password to pay the full amount. Because the normality of this test machine can only be ensured after the customer is calibrated and verified. No internal routine verification of customers without passwords cannot be performed;

3. Is there a complete data acquisition card? The sampling rate of the data acquisition card is high and the load reflection is sensitive. When the load reaches the protective force, the system can quickly respond backhaul;

4. The supplier needs to provide the customer's own software header, including the header of text reports.

These are important because the sensor is the core component of such testing machines. I hope customers are buying pluginsPulling force testing machineBe careful when you are in case of trouble later! Another point of note is: these are all within the scope of warranty. If you have similar faults, you can find a professional manufacturer to repair them!