Understanding the safety protection system of rotating shaft material torsion test machine

Material torsion test machineAs a mechanical testing equipment, components such as car rotating shafts can only be used for application after strict mechanical testing. The following is an introduction to the operation steps of our technicians on the safety protection system of the material torsion test machine:

1. The control mode adopts an intelligent expert setting system, and users can prepare the test process control method according to their actual requirements and automatically complete the test.

2. Windows XP full Chinese interface, human-computer dialogue method. All the test operations are completed by CRT, through the computer keyboard and mouse. The computer screen displays the test torque T and the twist angle

degree θ, various test curves (torque-time curve, torque-angle curve, angle-time curve, etc.) test machine working status, etc.

3. The size of the curve coordinates can be adjusted according to the actual experimental data.

4. Output and print various experimental report formats (report formats can be output in Excel or Word format).

5. Comply with JB/T9370-1999《Material torsion test machineTechnical Conditions" and relevant requirements for data processing of GB10128-88 "Metal Room Temperature Torsion Test Methods". In addition, it meets:

QC/T523-1999 "Automotive transmission shaft assembly bench test"

6. The shear modulus G value of the test piece, the yield point τs, the upper yield point τsu, the lower yield point τsl, the torsional strength τb, etc. can be detected. Torque and torsion angles are automatically tracked and the test curve is displayed. Displays the torque value, torsion angle, and torsion speed of the test. After the test is completed, the test data processing is automatically performed, and the performance parameters such as the yield point, the upper yield point τsu, the lower yield point τsl, the torsional strength τb can be automatically obtained as well as the stiffness value K, the yield torque value Ms, the torque value Mmax, the torque value, the torque damage, the torsion angle, etc. The report format can be prepared at will and the printing test report can be output according to user requirements.