Portable Richmond Hardness Meter
Portable Richmond Hardness Meter
Product Classification： Richmond hardness meter
Product Overview：The portable Richter hardness meter can easily and quickly measure a variety of metal materials based on the principle of Richter hardness measurement. While displaying the hardness measurement value immediately, it can freely convert between a variety of hardness (Brinell HB, Rockwell HRC, Vickers HV, Shore HS). Tolerance limits can be set in advance, and alarms can be automatically made outside
Main uses
Installed mechanical or assembled parts.
Mold cavity.
Heavy duty workpiece.
Failure analysis of pressure vessels, steam turbine generator sets and their equipment.
Workpieces with very small test space.
Bearings and other parts.
A formal original record of the test results is required.
Material distinction between metal material warehouses.
Rapid inspection of multiple measurement parts in a large range of large workpieces.
Technical parameters
Measurement range: HLD (170-960), HRC (17.9-69.5), HB (19-683), HV (80-1042), HS (30.6-102.6), HRA (59.1-88), HRB (13.5-101.7)
Measurement direction: 360° vertically down, obliquely down, horizontally, obliquely up, vertically up
Hardness format: Richter (HL), Brechter (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA), Vickers (HV), Shore (HS)
Measuring materials: steel and cast steel, alloy tool steel, stainless steel, grey cast iron, ductile iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel
Display: Highlight OLED, 128×64 graphic dot matrix display
Data storage: 600 sets (32~1 impact times)
Thermal printer works quietly and can print any number of test results.
Working voltage: 6V NiMH battery pack
Continuous working hours: approximately 150 hours
Charging power supply: 9V/500mA; Charging time 2.5~3.5 hours
Communication interface: USB2.0
(The above parameters are for reference only, and the detailed parameters are mainly real equipment)
- Previous article：Rockwell hardness meter HR-150A
- Next article：HBa-1 Pap hardness meter
Recommended informationNEWS
- [2022-08-26]Introduction to the functions of the repeated bending test machine of metal material
- [2022-08-26]How to use the universal tensile testing machine?
- [2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
- [2022-08-12]Testing method of metal rods by testing machine
- [2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
- [2022-08-04]How to install a clamp to save effort
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine
- [2022-07-15]Handling of displacement system failure of tensile test machine