Three-ring chain tension testing machine

Product usage
This machine is an important instrument and equipment for testing the physical properties, mechanical properties, process properties, structural properties and internal and external defects of steel strands, rebars and their products. The tensile strength, yield strength, specified non-proportional extension strength, elastic modulus and other performance indicators of the measured material can be automatically obtained, and closed-loop control such as constant rate loading, constant rate deformation, constant rate displacement, and constant rate strain can be completed.

(1) Host parameters:

Number of columns:6column(4Column,2lead screw);

Maximum compression/Stretch spacing (mm):1100/1450;

Column center spacing (mm):580;

Maximum piston stroke (mm):250;

Loading rate range:0.02%-2%FS;

Maximum speed of piston movement without load (mm/min):100;

Maximum speed for beam adjustment (mm/min):about220;

(II) Measurement parameters:

Maximum test force (kN):1000;

Test machine level:1class;

Effective measurement range of test force:2%-100%F.S;

Test force resolution: full scale1/500000(There is only one resolution in the entire range, and no grading);

Test force measurement accuracy: better than ≤±1%;

Displacement measurement resolution:0.01mm;

Control methods: force closed-loop control, deformation closed-loop control, displacement closed-loop control.

(III) Attached parameters:

Clamping method: built-in wedge type hydraulic automatic clamping;

Rebar jaw size(mm):high120×Wide100;