Intelligent digital carbon sulfur analyzer

Intelligent digital carbon sulfur analyzer
Product Classification: Elemental Analyzer
Product Overview:This microcomputer carbon and sulfur automatic analyzer is updated and can quickly and accurately detect the mass fraction of carbon and sulfur in steel and other metal materials. Suitable for steel, metallurgy, machinery and other industries, it is a good assistant for chemical analysis workers to conduct carbon sulfur detection.


one,use:
The instrument systemHV-4BThe updated and replaced microcomputer carbon and sulfur automatic analyzer can quickly and accurately detect the mass fraction of carbon and sulfur in steel and other metal materials. Suitable for steel, metallurgy, machinery and other industries, it is a good assistant for chemical analysis workers to conduct carbon sulfur detection.
2. Main technical indicators:
1.Analysis method: Carbon: Gas capacity method
Sulfur: iodine quantity method
2.Measurement range:carbonC(W):0.050-6.00%;
sulfurS(W):0.003-0.300%.
3..Scale size:0.25----1.00g
This instrument can be equipped with electronic balances in quantification test. In the absence of quantification, the test ranges of 1.0g (±60mg), 0.5g (±30mg), and 0.25g (±15mg) are the same as above.
4.Analysis time:
①Coupled with high-speed automatic ignition furnace: 65 seconds (two absorptions for 85 seconds),
⑴ Vertical: 55 seconds (two absorptions for 75 seconds),
②Coupled with tube furnace: ⑵ Horizontal: 80 seconds (two absorptions for 100 seconds)
5.Reading method: Direct reading of the quality score of the digital tube, printer printing results.
6.Analysis error: Carbon meets GB/T223.69-1997, and sulfur meets the allowable difference range of GB/T223.68-1997.
7.Environmental conditions: room temperature 5℃-40℃, air pressure: 90.658-106.658KPa.
8.Power supply and power consumption: single-phase AC 220V±10%; 50Hz, P≤260W.
three,HV-4BIntelligent digital carbon sulfur analyzer preparation
Serial number | Name | Specifications Model | unit | quantity |
1. | Intelligent digital carbon sulfur analyzerHost | HV-4B | tower | 1 |
2. | High-speed automatic ignition furnace | HB-2H | tower | 1 |
3. | Electronic balance | thousandth | tower | 1 |
4. | printer | miniature | tower | 1 |
5 | Spare parts | See the spare parts list for details | Batch | 1 |
(The above parameters are for reference only, and the detailed parameters are mainly real equipment)
- Previous article:Steel pipe bending test machine GGW-65
- Next article:Intelligent Visible Spectrophotometer
Recommended informationNEWS
- [2022-08-26]How to use the universal tensile testing machine?
- [2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
- [2022-08-12]Testing method of metal rods by testing machine
- [2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
- [2022-08-04]How to install a clamp to save effort
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine
- [2022-07-15]Handling of displacement system failure of tensile test machine
- [2022-07-15]Low temperature impact tester

















