Detailed test steps of non-woven tension testing machine

The non-woven tension tester is mainly used as the stretching of some raw materials such as paper, non-woven fabric, kraft paper, gauze, metal, composite materials, etc. It can conduct inspections on stretching, peeling, compression, bending, shearing, top breaking, puncture, fatigue, etc. of metals and non-metals, polymer materials, etc.

Non-woven fabrics are often used in our daily lives, such as clothes, dining table covers, curtains, and even some banners. Non-woven fabrics are composed of oriented or random fibers. They are a new generation of environmentally friendly material. They are moisture-proof, breathable, flexible, lightweight, non-combustible, easy to decompose, non-toxic and non-irritating, rich in color, low price, and recyclable. So what is the tensile resistance of non-woven fabrics? It is of great significance to the production of non-woven fabrics. It not only saves production costs, but also greatly improves product quality. These require the use of our non-woven tensile testing machine. So how does the non-woven tensile testing machine test the tensile testing test of non-woven fabrics? The following technicians of our company will share with you the detailed test steps of the non-woven tensile testing machine.

1. Before turning on the power switch of the non-woven tension tester, check whether the power supply is stable. If it is unstable, you must be equipped with a voltage regulator before turning on the power supply of the tester.

2. A little adjustment of the site position of the non-woven tension machine, so that the test machine and the ground are in a horizontal state.

3. Turn on the power supply on the control panel and check whether the indicator lights of the tensile test machine are bright to perform the working state. (If you have any questions, please contact the manufacturer to repair it)

4. Open the computer connected to the non-woven tension test machine, and then open the operation software. Reset all test machines

5. Install the tensile clamp at the upper and lower ends of the test machine to keep the clamp parallel to the horizontal plane

6. Put the non-woven fabric perpendicular to the ground and let the clamp clamp clamp both ends and adjust the displacement of the clamp so that the non-woven fabric is perpendicular to the ground.

7. Adjust the lower test speed and select the standard test speed. The up and down strokes should be adjusted to the required range in time.

8. Adjust the Zhonglian version to make it rise or fall for easy experimentation

9. Click the test of the non-woven tension test machine to start the test. The system will record the initial tension data of the paper tension test machine.

10. The non-woven fabric will slowly break or be damaged during the stretching process, and the load will be kept at the minimum value.

11. The operating software system automatically records the pulling force values ​​at different times

12. Take away the sample non-woven fabric

13. Repeat the test steps several times according to the above method

14. Calculate according to formula (automatic calculation by computer)

15. Turn off the computer and turn off the non-woven tension test machine.

The above are the detailed test steps of the non-woven tension testing machine shared with you. It is reminded that you must use it in accordance with the equipment instructions when operating to avoid machine failure and personnel injury. If you have any questions during use, you can call our service hotline through the web page, and our technicians will answer them one by one. Welcome to call and support!