Maintenance of electronic tension testing machine

The electronic tensile testing machine is a commonly used mechanical performance detection instrument with superior performance and high price. In order to reduce corporate costs, it is very important to ensure the normal use of the electronic tensile testing machine, and even extend its service life. When it comes to extending its service life, daily maintenance and maintenance are required in daily use. Below we will briefly introduce the maintenance of the electronic tension testing machine.

Maintenance of electronic tension testing machine

1. In daily work, the electronic tensioner must be detected and the parts with potential problems must be adjusted. If the wear of some parts is relatively high, it must be replaced in time to ensure a higher degree of accuracy.

2. The fixtures used on the electronic tension testing machine should be regularly applied to anti-rust oil.

3. Check the tightness of the screw regularly. If you find that the screw is loose, you must tighten it in time.

4. The frequency of fixtures is relatively high and wears faster. If there is oil leakage in the small piston, it means that the oxidation reaction is relatively serious. The fixtures should be cleaned frequently and pay attention to prevent rust and oxidation.

5. The connecting wires on the electronic tension testing machine should also be tested regularly to maintain good contact performance. If there is any looseness and fall, it should be reinforced in time.

6. Regularly check the various sprockets on the electronic tensioner to see if their transmission and rotational performance are smooth. If there is any looseness, adjust it in time.

The above briefly analyzes the maintenance of the electronic tensile tester. I hope the above introduction can help you. If you want to know more detailed information about the tester, you are welcome to follow our company. This not only provides you with high-quality tester equipment, but also provides various equipment information to help you further understand the equipment. If you have any needs, please come and consult.