The WDW-20 microcomputer controlled insulation material test machine is specially developed for various physical and chemical performance tests and tests for composite mortar insulation systems, polystyrene plate thin plaster exterior wall insulation systems, rigid polyurethane foam composite plate exterior wall insulation systems, other exterior wall insulation systems and roof insulation materials.
Maintenance matters of WDW-20 microcomputer controlled insulation material testing machine:
1. Add grease to the equipment regularly, keep the equipment clean, and check whether the connection is damaged regularly
2. Whether the high-efficiency nickel-hydrogen rechargeable batteries are exhausted, and replace the batteries in time
3. Detect the intelligent digital peak holding table with errors and abnormalities. If there is any problem, replace it in time.
4. Check the connection status of the WDW-20 microcomputer-controlled insulation material tester daily, including machine connection cable, computer connection cable, and electrical control cable
5. Wipe the insulation material electronic universal testing machine every day to keep the outside clean.
6. The grease in the bearings at the upper and lower ends of the lead screw is generally replaced every 3-5 years.
7. Add grease once every six months to the lead screw and wire master of the test machine.
8. Perform metering and testing of the test machine every year. To ensure the accuracy of the WDW-20 microcomputer controlled insulation material tester.
