Operating procedures of 100kn universal material testing machine [Information]

The 100kn universal material testing machine can perform physical and mechanical tests such as tensile, compression, bending, rebound, peeling, crushing hardness, shear, puncture, etc., and can conduct tests and provide data according to national standards such as GB, DIN, ISO, JIS, ASTM and other national standards and foreign standards. It can automatically obtain parameters such as maximum test force, breaking force, compression force, yield strength, tensile strength, bending strength, elastic modulus, elongation, etc.

In order for everyone to operate the 100kn universal material testing machine more conveniently, simplely, and reduce testing errors, our company's technicians have compiled a list of operating procedures for everyone about the 100kn universal material testing machine, which mainly includes the following contents to be noted:

1. Before using a 100kn universal material testing machine for testing, appropriate limits must be set.

2. Check the cable of the 100kn universal material tester to prevent cable damage and accidental disconnection.

3. Be careful when installing or removing samples, components or structural parts.

4. Make sure that the beam of the switch from computer control to manual control room does not move, otherwise do not put the test system offline.

5. During the test, the test operator should not leave the test site. After an emergency occurs, please press the emergency stop switch. The head, hands and other parts of the body should not be extended into the operating space of the test machine, nor should they be placed around the fixture.

6. Check the upper and lower limit positions before the test and turn on the emergency stop switch.

100kn universal material testing machine environmental conditions requirements:

1. Temperature: 15℃-35℃

2. Relative humidity: ≤85%RH

3. Atmospheric pressure: 86~106(Kpa)

4. No strong vibration around.

5. No direct sunlight or direct radiation from other heat sources.

6. There is no strong air flow around, but when the surrounding air needs to flow forcibly, the air flow should not blow directly to the box.

7. There is no strong electromagnetic field around it.

8. There is no high concentration of dust or corrosive substances around.

9. In order to ensure the normal operation and operation of the 100kn universal material testing machine, in addition to maintaining horizontal installation, a certain space should be reserved between the equipment and the walls or utensils.

After understanding the operating procedures of the 100kn universal material testing machine, the operator must use it in accordance with the procedures and specifications of the instructions when using the test machine. Otherwise, it is easy to cause dangerous situations such as machine failure and personnel injury. Friendly reminder: If you have any unclear areas, please call us for consultation. So that we can choose the product that suits you according to your actual situation!