Introduction to the functions of the repeated bending test machine of metal material

The bending test machine is mainly used to conduct ±90° repeated bending tests around the jaws of the specified radius. The editor will give a detailed introduction to the functions of the bending test machine!

Functional introduction of bending test machine:

1. The bending test machine has an automatic zeroing function. When the computer receives the test start command, the measurement system will automatically zero. To better record data.

2. The automatic return function of the bending test machine, which automatically recognizes that the movable beam will automatically return to the initial position at high speed after the test breaks.

3. Automatically save the test data and experimental conditions to prevent data loss caused by sudden power outage and forget to save the disk.

4. The test process, measurement, display, and analysis of the bending test machine are completed by the microcomputer.

5. Display method of bending test machine: The data and curves are displayed dynamically during the test.

6. The test results of the bending test machine can be accessed at will, and the data curve can be re-analysed.

7. After the bending test machine is completed, you can use the mouse to find the force value and deformation data of the test curve point by point, which is convenient and practical for obtaining test data of various materials.

8. Results comparison: Multiple test characteristic curves can be superimposed, reproduced, amplified, and presented in different colors to analyze and compare;

9. Curve selection: You can select curves such as stress and strain, force time, and intensity time for display and printing according to your needs.

10. The bending test machine can be tested in batches, and a batch of samples can be completed in sequence after setting the tests with the same parameters once.

11. The test report can be stretched according to customer needs: maximum force, tensile strength, elongation at break, elastic modulus, etc. Bending: maximum force, bending strength, deflection, elastic modulus, etc. Compression: maximum force, compression strength, yield strength, elastic modulus, etc. The test report can also be programmed and printed in the format required by the user;

12. The bending test machine has overload protection: it will automatically shut down when the load exceeds 10% of the rated value. An emergency stop switch is provided to cut off the power supply of the entire machine in an emergency. The system has automatic diagnosis function, and the measurement system and drive system are regularly checked, overcurrent, overtemperature, etc., and the machine is stopped immediately if abnormal conditions occur;

13. The bending test machine can realize independent operation of the host and microcomputer;