Operation steps of electronic universal testing machine

1.Electronic universal testing machineStartup order:

When the electronic universal testing machine test software is fully started and enters the online state, the machine can only run (the oil pump can start). Therefore, before conducting a test machine, the measurement system must be started first, and the startup sequence is: monitor → printer → computer → industrial control machine → start the test software → hydraulic source.

2. Conversion of electronic universal test machine switch:

The conversion switch on the electronic source panel is used to control the conversion of the oil circuit. When the electronic universal test machine test starts to run, the switch is turned to the "loading" level; after the test is completed, the sample must be removed first, and then the switch must be converted to the "quick reversal" level to allow the piston to return to the end. If the piston is lowered first, the broken samples will be against each other and destroy the jaws.

Jinan Hengsi Shanda Testing Equipment Co., Ltd.'s leading products include: electronic universal testing machine; hydraulic universal testing machine; impact testing machine; pressure testing machine; spring testing machine; artificial plate universal testing machine; steel strand testing machine; torsion testing machine; bending testing machine; plastic pipe testing machine; horizontal tensile testing machine; friction and wear testing machine and other series of equipment

http://www.hssdtest.com/