Detection of mechanical properties of rubber products by electronic universal testing machine

Electronic universal testing machineMechanical properties of various types of rubber materials and their products can be tested.
1. Product introduction of rubber microcomputer control electronic universal test machine:
The WDW-50 microcomputer controlled electronic universal testing machine is a new generation of microcomputer controlled electronic universal testing machine designed specifically for universities and research institutes. The computer system uses a fully digital controller to control the rotation of the servo motor through a speed control system. After deceleration, the speed reduction system drives the moving crossbar to rise and fall through a precision ball screw pair, completing various mechanical properties tests such as tensile, compression, bending, and shear of the sample. In addition, a wide variety of test accessories are equipped, which has very broad application prospects in the mechanical properties test of metals, non-metals, composite materials and products. This machine is widely used in material inspection and analysis of construction materials, aerospace, machinery manufacturing, wires and cables, rubber and plastics, textiles, home appliances and other industries. It is an ideal testing equipment for scientific research institutions, colleges and universities, industrial and mining enterprises, technical supervision, commodity inspection and arbitration and other departments.
2. Main technical indicators of rubber microcomputer-controlled electronic universal test machine:
1. Testing force: 50kN
2. Test force measurement range: 0.4%-100%
3. Test force display accuracy: better than the display value ±1%
4. Test force resolution: 1/300000 (no gears or equivalent to 6 gears)
5. Crossbeam displacement measurement accuracy: resolution is higher than 0.0025mm
6. Deformation measurement accuracy: ±0.5% (within the range of 0.2-10mm)
7. Test speed range: 0.01-500mm/min, stepless speed regulation
8. Speed ​​control accuracy: ±1% (0.01~10mm/min); ±0.5% (10~500mm/min)
9. Constant force, constant deformation, constant displacement control range: 0.2%-100%FS
10. Constant force, constant deformation, constant displacement control accuracy:
When the setting value is <10%fs, it is within ±1.0% of the setting value<>
When the setting value is ≥10%FS, the setting value is less than ±0.1%
11. Deformation rate control accuracy: When the rate is <0.05%fs, it is within ±2.0% setting value <>
When the rate is ≥0.05% FS, it is within ±0.5% set value
12. Test space: A. Tensile space: 600mm B. Compression space: 700mm
13. Fixture form: wedge-shaped clip specific
Flat jaw 0-7mm Round jaw 4-?9mm
14. Pressure plate size: φ100 mm
15. Power supply of the whole machine: single phase, 220V±10%, 50Hz, power: 1.5 kW
16. Working environment: Room temperature - 35℃, relative humidity shall not exceed 80%
17. Host size: 760×500×1750mm
18. Weight: 460 kg