What experiments can be done by universal testing machine

1. Bending test: Measure the bending strength (related to the length and width of the material), with three-point bending and four-point bending
2. Tensile test: mainly measure the tensile strength and elongation rate (plate and bar)
3. Compression test: mainly measure compressive strength (related to the area and height of the material), which is a destructive test
4. Shear test: Measure the shear strength (related to the diameter of the material), including pulling shears and pressing shears, which are mainly used in viscosity tests
5. Peel test: The materials that are composited together are separated, and the peel force and average peel strength (related to the width of the material) are peeled 90 degrees and peeled 180 degrees.
6. Cyclic reciprocating test: Don’t go back to zero point, unload after pulling and unloading, and dynamic testing machine is required to return to zero point. After pulling, the vehicle is reversed.
7. Fatigue test: low-period fatigue - static test machine; high-period fatigue - dynamic test machine required
8. Tear test: Find the tear strength for tearing (related to the thickness of the material) of the same material
9. Top-break test: geotextile test, measuring destructive force
10. Creep test: At a certain temperature (usually high temperature), apply a certain force to a certain material and test for a certain period of time. Test machine with high temperature creep test.