7 steps to master the operation of the corneal tension test machine

7Step by step to master the operation of the corneal tension test machine:

Jijinan Hengsi Shanda Instrument Co., Ltd. mainly produces universal testing machines, impact testing machines,Tension testerFor details of a series of test machines, cup protrusion test machines, pressure test machines, cup protrusion test machines, bending test machines, etc., please log in to our company's official website: Jinan Hengsi Shanda Instrument Co., Ltd. website.

1, turn on the test machine power first to preheat10After minutes, open the test software. In order to check whether the communication between the upper and lower computers is normal.

2, After opening the software, check whether the limit switch, manual button, up and down computer work normally and reliably.

3, After the connection is normal, select the required configuration, and then set the speed at the upper right side of the main interface.

4, move to a reasonable position and clamp the fixture.

5, estimate the position and position of the test stand, and adjust the limit switch. Adjusting the limit switch position is in accordance with the principle: ensure that the two fixtures cannot collide while meeting the normal test. If two fixtures collided, they will have serious consequences.

6, clamp the sample, check the settings again, and "clear".

7, run, during a set of tests, do not change the settings or adjust the limit switch at will; the operator should not leave the test machine,The plane should be stopped and people should leave.

The aboveTension testerAll information is provided by Jinan Hengsi Shanda, more information on tensile testing machines: Things that need to be paid attention to in tensile testing machines