System connection of universal testing machine

Among many models of test machines,Universal testing machineIt can be said that it has summarized the advantages of other experiments and operations very well. The entire system service needs are things that need to be paid attention to. Pay attention to proper operation when using it. Jinan Hengsi Shanda Instrument Co., Ltd. will take you to fully understand the universal machine.

Remove the bundles in each part and clean kerosene to clean the inside of the oil pipe, especially the threaded threads of the connecting ports of each oil pipe;Universal Material Testing MachineCheck whether the gasket at the joint is complete. If it is damaged due to transportation reasons, use the new gasket included in the test machine to prevent oil leakage during high pressure; use a suitable wrench to connect each oil pipe. If the electronic universal test machine is seamless, it should be connected to the main machine and rely on the movement of the console to adjust the spacing to connect to the console end. Remove the residual oil in the oil tank and remove the residue in the oil tank; uncover the iron door of the hydraulic control box and you can see the wire mesh oil filter. When filling the oil, it is poured into the oil tank through this oil filter. The test machine usually uses hydraulic oil. The electronic tension test machine should use hydraulic oil with higher viscosity in summer and hydraulic oil with lower viscosity in winter; be sure to pay close attention to the oil level when refueling. The tester cannot work normally if the oil volume is too small. Too much oil volume will cause hydraulic oil to leak from the working cylinder port.

MoreTesting machineAll information is in Jinan Hengsi Shanda Instrument Co., Ltd.