Universal testing machine adjustment process

Universal testing machineThe application range of instruments and equipment is broad, including tensile testing machines, pressure testing machines, etc., including many tests such as tensile, compression, and bending, which fully complies with the national standard quality inspection table.

The universal testing machine (UTM) stretches, bends, compresses or pulls the splines of plastic material through adjustments at different speed levels. This is an ordinary equipment in plastic mixing laboratories. During the preparation of compound mixing, UTM testing materials can be used to determine whether the material is suitable for certain specific processing applications or terminal applications. UTM can also be used for product quality control to ensure consistency between batches of product quality.

The UTM test machine includes one or more vertically loaded columns, a fixed horizontal base is installed on the columns, and a movable horizontal cross head (cross beam) on the top. In today's UTM testing machines, ball screws are usually on the columns to fix the movable cross head. The size of the UTM is characterized by a frame bearing level and a dynamometer measuring load/tension force. The dynamometer is attached to a movable cross head driven by an electric motor or hydraulic device. The series of dynamometers with fixtures measure the magnitude of force, and the results can be displayed through a digital display or PC. Many UTMs have interchangeable dynamometers and therefore can match the different materials tested. Static tests are carried out using standard electronic universal testing machines, and the usual loading speed range is 0.001~20 in./min (1in.=2.54cm). Dynamic or cyclic tests such as crack growth and fatigue tests are usually performed using a hydraulic servo system UTM test machine, which is longer and has a lower load.

Currently,Universal testing machineCommon items tested are tensile strength and tensile modulus, flexural strength and modulus. When performing tensile tests according to ASTM D 638 and ISO 527, there are clamps on both ends of the spline. One clamp is stationary and the other is fixed on the cross head, moving away from the fixed clamp, pulling the spline until the spline breaks, and the cross head will automatically stop when it breaks. During bending test (ASTM D790, D6272 and ISO178), the spline is placed on the two supporters of the test machine fixed machine tool. In this test, the direction of the crosshead movement is opposite to the direction of movement in the tensile test, pushing towards a center without support instead of traction until the spline bends or even breaks. Because most thermoplastic materials do not break during this test, it is impossible to calculate the fracture bending strength. Therefore, the standard test method requires the calculation of bending stress when the strain is 5%.

The capacity of commonly used electronic UTM testing machines is 100~135,000 lb. The larger the size, the higher the cost. Generally speaking, vertical devices are smaller and easier to operate, and can also make difficult samples such as films as heavier injection molded parts by the gravity of the sample itself. The single column UTM test machine has a lower force range and a lower price, and its structural capacity is generally 1000 lb. The structural capacity of the gate-type UTM test machine can reach 1000~135,000 lb. The force gauge is also classified based on a certain force value suitable for the structure of the UTM universal testing machine and the sample. For example, a 100 lb dynamometer is installed in a 1000 lb mold frame and can provide a 100 lb test load. The capacity of the dynamometer should not exceed the sample's predicted fracture load, otherwise it will affect the accuracy of the test results.

MoreTesting machineAll information is available at Jinan Hengsi Shanda Instrument Co., Ltd.