8 steps of auspicious solution to the test process of drop test machine

Drop test machineIt is to detect damage when the product falls and reduce the loss to a small amount. The following is a detailed explanation of the operation of the fall test machine by Jinan Hengsi Shanda Instrument Co., Ltd.

1. Wiring: Connect the power cord included in the test machine to the three-phase power supply and ground it. Connect the control box and the test machine to the test machine using the random connection wire according to the plug adaptation condition, and run the rising/descent command for trial operation. (If the rising key is pressed during the trial run but runs downward or the falling key is pressed but runs upward, just change the phase count at the power supply.

2. Press the rising key to raise the measured object to be set to the set height;

3. Drop height adjustment: OpenDrop test machineThe mains power supply, set the required height for the test (as follows), press the rise key to reach the set height; if it stops in the middle, it must reach the set height before the reverse running command can be executed;

4. Place the object to be tested on the work surface and fix it with a fixing rod;

5. Press the drop button to instantly disengage the work surface from the measured object, and the measured object will fall freely;

6. If the test is repeated, repeat the above steps.

7. Press the reset key to restore the workbench to work;

8. After the test is completed: Press the lower key to make the work surface operate to the position and turn off the power button;

Related technical articles:Brief explanation of 8 aspects of digital explicit tensile testing machine

Label:Universal testing machine,Hydraulic universal testing machine,Tension tester,ImpactTesting machine, twisting test machine, Material Testing Machine