Company News
Typical test conditions of material torsion test machines
Release time：2018-11-23 source：Jinan Hengsi Shanda Instrument Co., Ltd. Browse：
Typical test conditions of material torsion test machines
Material torsion test machineDifferent degrees of tests are made based on the non-transmissible materials. Our company makes the following detailed analysis of the typical test conditions of the torsion test machine based on actual conditions
1. Loading and running continuously at a certain torque and speed, the running time is short 5 seconds, and the long running time is unlimited;
a) Specific working conditions:
i. Input torque and speed 4500Nm/6RPM, run for 10 minutes
2. The test is reciprocated with a certain torque and frequency cycle, and the running time is not limited;
a) Specific working conditions:
i. Input torque and frequency 25000Nm/2Hz, reciprocating for 24 hours
3. Loading and running continuously at a certain torque and speed, fixing the other end of the subject to sample, and performing static torsional stiffness and strength tests.
a) Specific working conditions:
i. Input torque and speed 20000Nm/0.5RPM, run until the test piece is damaged
MoreMaterial torsion test machineAll in Jinan Hengsi Shanda Instrument Network
Tags: Testing machine, universal testing machine, hydraulic universal testing machine, tensile testing machine, impact testing machine, material torsion testing machine
Recommended productsPRODUCTS
