Things to note when installing tensile testing machine fixtures

Tension testerManufacturers often remove the fixture before shipping to customers to avoid inaccurate equipment test data and damage during transportation, and affect the appearance of the equipment. Therefore, customers will install the fixture by themselves after receiving the tension test machine. Our company has introduced some tips for the installation of the tension test machine:

When installing the clip, firstTension testerThe lower joint is specifically connected to the lower clamp, then insert the two into the guide rod, connect it through a fixing pin, and then tighten the lock nut and the connecting nut to eliminate gaps.

When installing the upper clamp, first connect the universal joint to the upper connecting seat, then connect the two to the upper crossbeam, then connect the upper clamp to the upper joint, then connect the universal joint through a fixing pin, and then tighten the lock nut.

Tips: Let me tell you a labor-saving method to install the specific method on the clamp! Put the upper clamp on the lower clamp and manually raise the middle cross beam so that the upper clamp is assembled with the universal joint. At this time, you should be careful to move the middle beam to avoid damage to the parts.

MoreTesting machineAll information is available on Jinan Hengsi Shanda Instrument Network