How to ensure the correct maintenance of hydraulic universal testing machines by testers

Hydraulic universal testing machineIt plays an important role in the mechanical inspection of building materials and metal materials. It can accurately measure the required experimental data, so the hydraulic universal testing machine has been widely used in laboratories of large steel enterprises and quality inspection units. However, during the use of hydraulic universal testing machines, we should pay attention to the maintenance and maintenance of them.
Many testers often complain about the failures that occur during the use of hydraulic universal testing machines. In fact, many problems are caused by the tester's failure to pay attention to the correct way of the hydraulic universal testing machine during use, which leads to problems with the test machine. If we have a full understanding of the hydraulic universal testing machine, we can avoid things happening well.
Jinan Hengsi Shanda Instrument Co., Ltd.The produced test machines are based on their full understanding of the hydraulic universal testing machine and start from many aspects to teach the vast number of testers how to properly maintain the hydraulic universal testing machine.
NO1. Use a suitable fixture to complete the corresponding experiment. The hydraulic universal testing machine is only equipped with fixtures for standard samples, and for non-standard models, suitable fixtures are required to be used in conjunction with them to ensure the accuracy of the test.
NO2.Hydraulic universal testing machinecleaning and cleaning work. Some dust will inevitably appear during the test. If these dusts are not cleaned in time, they may cause significant damage to the hydraulic test machine, so cleaning must be carried out after each use.
NO3. Replenish hydraulic oil in time. Hydraulic oil must be replenished for a certain period of time.
NO5. Replacement of filter. Generally speaking, filters with blockage indicators should be tested and replaced in time, while hydraulic universal testing machines without blockage indicators should be replaced every six months.
NO4. Check components regularly.
NO8. Fasteners must be locked regularly. The test process may cause looseness of the fasteners and therefore it must be processed regularly.
NO6. Cleaning and inspection of cooler. Regularly observe the cooler condition and clean it in time if there is dirt accumulation.
NO7. Supplementary issues of energy accumulators. If the pressure in the accumulator is not enough, replenish it in time.
NO9. Apply lubricant to the transmission part in time. This reduces friction.
The above series of operations are conducive to the maintenance of the hydraulic universal testing machine. For testers, if these steps can be effectively implemented, the problems that arise when using the hydraulic universal testing machine will be greatly reduced.
Jinan Hengsi Shanda Instrument Co., Ltd.It is a professional product in my country's hydraulic universal testing machine market. In its analysis of product use and performance, many methods that are conducive to the maintenance of testers are summarized. These methods can help the majority of users to use hydraulic universal testing machines correctly.