Current location：front page >> Product Center >> Cup burst testing machine series >> Microcomputer-controlled electro-hydraulic servo cup protrusion test machine

Microcomputer-controlled electro-hydraulic servo cup protrusion test machine GBW-60Z

Product Classification： Microcomputer-controlled electro-hydraulic servo cup protrusion test machine

Product Overview：This cup protrusion tester is mainly used for process performance tests of metal thin plates and thin strips to test the plastic deformation properties of thin plates and thin strips. Meet the requirements of the national standard GB/T 4156-2007 "Metal Material Thin Plate and Thin Band Eriksen Cup Protrusion Test". Compound oil cylinders that use hydraulic clamping and hydraulic stamping; the samp

Microcomputer-controlled electro-hydraulic servo cup protrusion test machine GBW-60Z

This cup protrusion tester is mainly used for process performance tests of metal thin plates and thin strips to test the plastic deformation properties of thin plates and thin strips. Meet the requirements of the national standard GB/T 4156-2007 "Metal Material Thin Plate and Thin Band Eriksen Cup Protrusion Test".

It adopts a composite oil cylinder with hydraulic clamping and hydraulic stamping; the sample automatically stops when it encounters cracks, making it easy to observe cracks; it has peak memory function, namely automatic memory of punch pressure and deformation depth; flip-type fixtures, punches and samples are easy to replace and load and unload.

GBW-60Z is a microcomputer-controlled automatic cup-burst tester, PC microcomputer operation control, and automatically complete clamping, stamping, measurement, calculation, parking, etc. according to pre-set programs and data. Cup punching test can also be performed according to GB5125-1985 "Nonferrous Metal Cup Filling Test Method" to test the anisotropy of nonferrous metal thin plates.

Main technical indicators:

Specifications and models	GBW-60Z
Test the thickness of steel plate	Standard cup protrusion test 0.1-2mm, (non-standard cup protrusion test: 0.1-3mm)
Plate width	100mm
Punch stroke	60mm
Clamping piston stroke	19-21 mm
Cup load	60kN
Clamping load	25kN
Mold specifications	Standard punch diameter: Φ20±0.05mm, standard pad die hole diameter: Φ33±0.1mm Standard die bore diameter: Φ27±0.05mm; (non-standard customization)
Digital resolution	0.01mm
Digital display method	PC screen display
Show content	Clamping force, impulse pressure, displacement and cup protrusion value, rate, draw force-displacement curve
Control method	Automatically implement the test process of computers
Structural features	Compound oil cylinder, dual oil pump oil supply, grating scale measurement

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Microcomputer screen display cup protrusion test machine GBW-60B
Next article：Metallographic microscope

Recommended informationNEWS

[2022-08-26]How to use the universal tensile testing machine?
[2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-12]Functional uses and applicable areas of tension testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]What are the calibration methods for electronic tensile testing machines?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine