Pen hardness meter HL5106
Pen hardness meter HL5106
1. Overview of pen hardness meter:
Pen hardness meterIt is a portable measuring instrument that can quickly, without damage and high accuracy to measure the hardness of common metal materials. It can be used in laboratories and engineering sites. The instrument measurement conditions can be set to meet a variety of measurement needs. This instrument can be widely used in the field of testing, such as manufacturing, metal processing, chemical industry, and commercial inspection. It is a necessary instrument for material non-destructive hardness detection.
2.Pen hardness meterMeasurement principle:
Using the impact body of the specified mass under the action of elastic force, impact the surface of the sample at a certain speed, and calculate the hardness value using the ratio of the rebound velocity of the punch at 1 mm away from the sample surface.
3.Pen hardness meterTechnical parameters
Performance metrics | |
Measurement direction: Supports 360º (vertical down, oblique down, horizontal, oblique up, vertical up) | |
Detection range: (170-960)HLD, (17.9-69.5)HRC, (19-683)HB, (80-1042)HV, (30.6-102.6)HS, (59.1-88)HRA, (13.5-101.7)HRB | |
Hardness standard:Richmond (HL), Brechnar (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA), Vickers (HV), Shore (HS) | |
Display error:±0.5%(HLD=800) | |
Repeatability of the value:0.8%(HLD=800) | |
show:Industrial grade 128×64 graphic dot matrix OLED liquid crystal | |
Appearance size:148mm×30mm×30mm | |
power supply | |
Rechargeable lithium battery | |
Continuous working hours | |
About 20 hours | |
Working conditions | |
Operating temperature -10-50℃; Storage temperature: -30℃-60℃; Relative humidity ≤90%; | |
Applicable materials | |
Steel and cast steel, alloy tool steel, stainless steel, grey cast iron, ductile iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel | |
Main application areas | |
Bearings and other parts; Failure analysis of pressure vessels, steam turbine motor units and equipment; Heavy duty workpieces; Installed mechanical or permanent assembly parts; Workpieces with very small test space; Requires a formal original record of the test results; Material distinction between metal material warehouses; Rapid inspection of multiple measurement parts of large workpieces | |
Standard configuration | |
Host Nylon brush Support ring Carrying bag manual Charging head Charging cable | 1 unit 1 1 1 1 book 1 1 item |
- Previous article：Reckhee hardness meter HSL5300
- Next article：Surface roughness meter HR3200
Recommended informationNEWS
- [2022-08-12]Testing method of metal rods by testing machine
- [2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
- [2022-08-12]Functional uses and applicable areas of tension testing machine
- [2022-08-04]How to install a clamp to save effort
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]What are the calibration methods for electronic tensile testing machines?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine
- [2022-07-15]Handling of displacement system failure of tensile test machine
- [2022-07-15]Low temperature impact tester