Main uses and installation methods of WAW-1000G microcomputer controlled steel strand tester

The main machine of the WAW-1000G microcomputer controlled steel strand tester uses a cylinder under-mounted main machine, which is mainly used for tensile, compression, bending and other tests of metal, non-metal, and steel stranded wires. Suitable for metallurgy, construction, light industry, aviation, aerospace, materials, colleges and universities, scientific research institutions and other fields. The test operation and data processing comply with the requirements of GB228-2010 "Room Temperature Materials Metal Tensile Test Method". What I will share with you below is the main uses and installation methods of the WAW-1000G microcomputer controlled steel strand tester. Let’s learn about it together.

The main uses of WAW-1000G microcomputer controlled steel strand tester:

This test machine uses hydraulic loading, and displays the test results on the microcomputer screen, which is convenient to operate and accurate and reliable test readings. It is mainly used for tensile performance tests of concrete prestressed steel strands. Added accessories can be used for tensile, compression, bending and shear tests of general steel and other metal materials, and can also be used for compression and bending tests of general materials, plastics, cement and concrete.

This machine has a loading speed display function, which can achieve the loading speed required by the sample.

This machine has networking and upgrade interfaces reserved, and can be upgraded to a servo universal test machine according to user needs, which is an ideal product for updating and replacing.

Installation of WAW-1000G microcomputer controlled steel strand test machine

1. Install on a solid workbench or on a flat and solid ground;

2. Try to stay away from places with high air flow such as doors and windows;

3. There is no obvious electromagnetic field interference in the environment;

4. Prevent exposure to sunlight or approaching air conditioning equipment, etc.;

5. Ambient temperature: 20±5℃ and fluctuates less than 2℃ per hour; relative humidity: ≤80%;

6. Power supply frequency: 50Hz;

7. Power supply voltage: AC 380±10V 50Hz Power 3.0KW.

8. The power supply must have a grounding wire, and users should pay special attention to this.

Because the WAW-1000G microcomputer-controlled steel strand tester has grounding protection, if the power supply with grounding is not used, in case of leakage, it may hurt people.

9. Level adjustment:

Place the level on the test machine platform surface to adjust the four adjustable legs below to make the test machine's test platform in a horizontal state. At this time, the host is installed.

The above is a related introduction to the main uses and installation methods of the WAW-1000G microcomputer controlled steel strand tester. It seems simple, but it cannot be taken into account in the actual process, resulting in inaccurate test results. Why do we need to measure multiple times when measuring the sample? It is to ensure the accuracy of the data. If you do not take multiple measurements, the conclusions drawn must be not accurate data. I hope the brief introduction above can help you.