What are the vulnerable parts of the tensile tester and how to maintain them

Tensile testing machine is also known as universal material testing machine. The universal testing machine is a mechanical after-force test machine used for mechanical properties such as static loading, tensile, compression, bending, shearing, tearing, peeling, etc. for various materials. It is suitable for various physical and mechanical properties testing of plastic sheets, pipes, special profiles, plastic films, rubber, wires, cables, steel, glass fiber and other materials. It is an indispensable testing equipment for physical properties testing, teaching research, quality control, etc. As an important part of the instrument, different materials require different fixtures, which is also an important factor in whether the test can be carried out smoothly and the accuracy of the test results.

Every user of the tensile tester should have a basic understanding of the machine before use, especially some vulnerable components, including: accessories, motors, sensors, sheet metal and sheet metal of the tensile tester. Do you know what vulnerable components of the tensile tester are and how to maintain them? Let me introduce to you what vulnerable components of the tensile tester and how to maintain them:

1. Motor: The motor controls the operation of mechanical components and is an indirect speed change device for subsidizing motors. Although the probability of the motor being present is not very high, if used too frequently, once the temperature is too high, the entire machine cannot operate normally. The motor is the soul of the entire component. Because of the CPU of the computer, it is necessary to regularly check the temperature, vibration status and internal wires of the motor, and clean the motor regularly. 2. Sensor: Sensors are considered to be electronic components. In addition to a series of problems caused by components, the most important thing about sensor failure is that the test force is overloaded. Some chain reactions caused by overload, such as collision machines, make the test machine unable to perform. Only by replacing the sensor and then recalibrating the sensor can it work normally.

3. Attachment: Attachment is mainly used to fix the sample. Because when performing experiments, the sample clamping force will change with wear. In addition, since the material of the component is metal, there may be rust, corrosion and other phenomena during long-term use.

4. Sheet metal: Sheet metal is the outer coat of the tension machine. It may be used frequently or accidentally scratched the sheet metal. At this time, it must be repaired in time to avoid corrosion and scrapping of sheet metal due to impurities such as water. In addition to the above mentioned situations, common sheet metal damage also causes serious deformation of the sheet metal due to bumps, collisions, etc. during transportation.

5. Board: The tension machine board mentioned here does not refer to the computer board, but the board used for testing. Once the board is damaged, you can only buy it again, or you need high-tech to repair the board, which is generally more expensive.

Do you know what are the vulnerable parts of the tensile tester and how to maintain them? If you want to know more details about the tester, you are welcome to follow our company. This not only provides you with high-quality tester equipment, but also provides various equipment information to help you further understand the equipment. If you have any needs, please come and consult.