What are the characteristics of electronic universal testing machine and electronic measurement and control system of microcomputer control

The electronic universal testing machine of microcomputer control is a universal testing machine with stable and reliable performance, and has protection devices such as overcurrent, overvoltage, overspeed, and overload. The machine is a table-type single-space door-type structure, with stretching and compression in the lower space. The main unit consists of a door-type structure of double columns, double lead screws, upper beam, middle beam and workbench, and the speed control system is installed at the lower part of the workbench. The transmission principle is that the Japanese Panasonic AC servo motor with high speed regulation accuracy, wide range and stable performance is reduced by the synchronous tooth belt and planetary wheel deceleration system and drags the ball screw pair to rotate, driving the middle beam to move up and down, thereby driving the attachments such as stretching and compression to move up and down to achieve loading and unloading of the sample. This structure ensures that the frame has sufficient stiffness and achieves efficient and stable transmission. What are the characteristics of the electronic universal testing system of microcomputer-controlled electronics and universal testing machine? Let me introduce it below:

The characteristics of the electronic universal testing machine and electronic measurement and control system of microcomputer control are roughly as follows:

(1) Adopt Japanese AC servo driver and AC servo motor, with stable and reliable performance, and has protection devices such as overcurrent, overvoltage, overspeed, and overload. The speed regulation ratio can reach 1:100,000.

(2) The electronic universal test machine for microcomputer control has protection functions such as overload, overcurrent, overvoltage, upper and lower displacement limits and emergency stops.

(3) The built-in controller ensures that the test machine can realize closed-loop control of parameters such as test force, sample deformation and beam displacement, and can realize tests such as constant-speed test force, constant-speed displacement, constant-speed strain, constant-speed load cycle, and constant-speed deformation cycle. Smooth switching between various control modes.

(4) At the end of the test, you can manually or automatically return to the initial test position at high speed.

(5) The automatic shift, zeroing, calibration and storage of physical zeroing, gain adjustment and test force measurement is realized in the true sense. There is no analog adjustment link, and the control circuit is highly integrated.

(6) The electrical control circuit refers to international standards, complies with the national electrical standards of the test machine, has strong anti-interference ability, ensuring the stability of the controller and the accuracy of the experimental data.

(7) The electronic universal test machine of microcomputer control has a network interface, which can transmit, store, print and record data and print network transmission and printing, and can be connected to the internal LAN of the enterprise or the Internet network.

So if you have read this article on the characteristics of the electronic universal testing system of microcomputer control electronics, it will be helpful to you? If you have any questions, please call for consultation. For more information about testing machines, please consult our company. Our company has complete testing instruments to ensure the provision of accurate and high-quality testing and experimental equipment. Welcome new and old customers to visit and negotiate!