How to use rubber tensile testing machine and precautions

The rubber tensile tester is a mechanical force tester used to test the mechanical properties of materials such as static loading, tensile, compression, bending, shearing, and peeling. It is suitable for various physical and mechanical performance tests of plastic sheets, pipes, special profiles, plastic films, rubber, wires, and rubber, wires, waterproof rolls, metal wires, metal ropes and other materials. Let me introduce to you the use method and precautions of the rubber tensile tester.

1. Method of using rubber tensile testing machine

1. Hang the corresponding swing snake according to the selected dial; install the required fixtures; adjust the plumb position of the swing weight and the zero position of the load pointer.

2. Turn on the power switch, check the test machine circuit, various control buttons, limit switches, etc. to make them in normal working state.

3. Install the sample; if you need to draw, choose the drawing ratio and wrap the transmission rope; install the drawing paper and pen.

4. Adjust the speed adjustment knob to the appropriate position and press the "Speed ​​Adjustment Tension" button to test.

5. After the test is completed, turn off the power switch.

2. Precautions for the use of rubber tensile testing machine

1. Before working, check whether the reducer under the workbench has lubricating oil;

2. The pre-tightening speed is less than the experimental speed to prevent the two fixtures from touching, so as not to damage the fixtures;

3. Be careful to connect the sensor line;

4. Add lubricating oil to the screw and wire master of the test machine every six months;

5. Keep the test machine clean.

After understanding the use of the rubber tensile tester and precautions, the operator must use it in accordance with the procedures and regulations of the instructions when using the press. Otherwise, it is easy to cause dangerous situations such as machine failure and personnel injury. If you have any questions during use, you can call our service hotline through the web page, and our technicians will answer them one by one. Welcome to call and support!