TLS number display spring tension tester (single-arm type)

This machine is made in accordance with the technical requirements specified in the national spring tension testing machine standards. It is a professionally designed automatic control and data acquisition system to realize the full digital adjustment of the data acquisition and control process. It can test and analyze the tension, pressure, displacement, stiffness and other strengths of precision springs such as tension springs, compression springs, disc springs, tower springs, leaf springs, clamp springs, leaf springs, composite springs, gas springs, mold springs, special-shaped springs, etc.

1. Style: Single-arm

2. Testing force: 10, 20, 50, 100, 200, 500, 1000, 2000, 5000N;

3. Test force classification: ×1, ×2, ×5, ×10, and four levels;

4. Range: 2%-100%;

5. Test force accuracy; ±1%

6. Displacement resolution: 0.01mm;

7. Displacement measurement accuracy: ±1%;

8. Tension stroke: 700mm (can be enlarged)

9. Compression stroke: 700mm (can be enlarged)

10. Test stroke: 700mm (can be enlarged)

11. Displacement speed control range: 0.05mm/min ~ 500mm/min Adjustable in staging

12. Displacement speed control accuracy: ±1%;

13. Test machine level: Level 1

14. Deformation display error: ≤±(50+0.15L)

15. Appearance: Should meet the requirements of GB/T2611

16. Complete set: Comply with standard requirements

17. Protection function: The test machine has overload protection function

18. Power supply: 220V, 50Hz

1. Automatic calibration: The system can automatically realize calibration of display accuracy;

2. The force value corresponding to the displacement can be automatically obtained;

3. Gear conversion: Switch to the appropriate range according to the magnitude of the test force to ensure the accuracy of the measurement data;

4. Automatic display: During the entire test process, the test force, peak value, and test status will be displayed in real time;

5. Automatic control: After the test parameters are entered, the test process can be automatically completed;

6. Break judgment: After the sample is broken, the moving beam will automatically stop moving;

7. Limit protection: It has two levels of limit protection functions: mechanical and programmable control.

1. One host;

2. One set of special stretching and compression auxiliary tools (meets user requirements);

3. One set of AC servo motors and AC servo speed regulation systems;

4. A set of precision reducer;

5. One high-precision load sensor;

6. A set of microcontroller control systems.