TLS digital explicit spring tension tester (gate type)

This machine is made in accordance with the technical requirements specified in the national spring tension testing machine standards. It is a professionally designed automatic control and data acquisition system to realize the full digital adjustment of the data acquisition and control process. It can test and analyze the tension, pressure, displacement, stiffness and other strengths of precision springs such as tension springs, compression springs, disc springs, tower springs, leaf springs, clamp springs, leaf springs, composite springs, gas springs, mold springs, special-shaped springs, etc.

1. Style: door style;

2. Testing force: 10KN, 20KN, 50 KN, 100KN

3. Test force classification: ×1, ×2, ×5, ×10, and four levels;

4. Range: 2%-100%;

5. Test force accuracy: ±1%;

6. Displacement resolution: 0.01mm;

7. Displacement measurement accuracy: ± 1%;

8. Tensile stroke: 700mm (can be enlarged);

9. Compression stroke: 700mm (can be enlarged);

11. Displacement speed control range: 0.05mm~500mm can be adjusted in tandem;

12. Displacement speed control accuracy: ± 1%;

13. Test machine level: Level 1;

14. Deformation display error: ≤±(50+0.15L);

15. Appearance: It should comply with the requirements of GB/T2611;

16. Complete set: meets the standard requirements;

17. Protection function: The test machine has an overload protection function;

18. Power supply: 220V, 50Hz;

1. Automatic calibration: The system can automatically realize calibration of display accuracy;

2. The force value corresponding to the displacement can be automatically obtained;

3. Gear conversion: Switch to the appropriate range according to the magnitude of the test force to ensure the accuracy of the measurement data;

4. Automatic display: During the entire test process, the test force, peak value, and test status will be displayed in real time;

5. Automatic control: After the test parameters are entered, the test process can be automatically completed;

6. Break judgment: After the sample is broken, the moving beam will automatically stop moving;

7. Limit protection: It has two levels of limit protection functions: mechanical and program control.

1. One host;

2. One set of special stretching and compression auxiliary tools (meets user requirements);

3. One set of AC servo motor and AC servo speed regulation system;

4. A set of precision reducer;

5. One high-precision load sensor;

6. A set of microcontroller control systems.

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)