Things to note when extending the service life of the tensile tester

Jinan Hengsi Shanda Instrument Co., Ltd.The tensile testing machine produced has a wide range of uses and is mainly used to test the tensile strength, extrusion strength and elongation of various materials, semi-finished products and finished products. It can be used for peeling, tearing, bending, flexure, compression and other tests. It has been widely used in metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, fur and other industries.
People engaged in mechanical operations know that any type of machinery needs to follow its own level of work and that any machinery needs to be maintained within a certain period of time before it can continue to be used. Because only by following the above two operating machinery and regular maintenance machinery can its service life be ensured, the tensile testing machine is no exception. Today, the editor willTension testerShare the details you should pay attention to when working:
1. Overload and overspeed work will only cause "fatal" damage to the tensile test machine and will also affect the results of future tests. Therefore, we should eliminate such wrong operations;
2. Try not to place objects with high weight and high hardness around the tensile tester to prevent hard objects from colliding with the lifting screw;

3. The clamp of the tensile tester must proceed smoothly when moving up and down to avoid friction with the machine itself. Before each test, be sure to check the tightness of the clamp screws;
4. When replacing the fixture, be sure to choose the correct fixture to prevent it from affecting the results of the test;
5. The connection steps of the microcomputer and the tensile testing machine must be carried out according to the instructions, or the experienced operators must make the correct connection;
6. When the results obtained by the tensile tester need to be printed, check whether the printer is available;
7. After use, remove the fixture and the object to be tested to facilitate the next use;
8. Finally, be sure to click the close button on the microcomputer, remember not to directly turn off the power switch (the same as turning off the computer).
The above is the method summarized by the editor on extending the service life of the tensile test machine. I hope it will be helpful to your use of the tensile test machine.