Main matters of hydraulic universal testing machine

There are some precautions during the use of the test machine, which can better maintain the test machine and make its service life longer. Here is an introductionHydraulic universal testing machineSome points to pay attention to when using it.

Test machine has some matters needing attention in operation process, so better able tomaintain the testing machine, the service life is longer, here are a few pay attention to the use of hydroulic universal testing machine.

First of all, during operation, the order of turning on and off the machine is controlled by the microcomputer's control software, and it should be ensured that the software is not turned off when the test machine is turned on.

First, in the process of operation, the switch machine order, because the control software testing machine controlled by microcomputer, shall ensure that opened in the testing machine, the software is not closed.

1. Power on: Turn on the power of the microcomputer (computer) and turn on the control software to turn on the power of the test machine.

1 boot: open the computer (computer) on the power control software to open the power of the testing machine.

2. Shut down: Turn off the power of the test machine and turn off the control software to turn off the power of the microcomputer (computer).

2 off: close the test machine power down control software PC (computer) power off.

There are several other points to note: 1. The key parts of the test machine (such as jaws, gearbox, etc.) should be frequently filled with lubricating grease.

There are a few points to note: the key parts of the 1 test machine (such as: jaw, gear box) should be regularly lubricating oil.

2. The computer should be placed in a dry and ventilated room.

2 computer should be placed in dry and ventilated room.

3. If not used for a long time, power should be turned on once a month.

3 if you do not use a long time, every month should be energized operation a.

Next is the software environment to use: Office2000 (Word2000, Access2000) must be installed

Then use the software environment: to install Office2000 (Word2000, Access2000)

There are also some points to note about maintenance: the main power of hydraulic universal testing machines is hydraulic presses, so when used in test machines or factories, it must be used correctly and maintained. Maintenance is an important solution to prevent equipment problems.

There are a few points to note: maintenance of hydroulic universal testing machine is the main force in hydroulic machine, so testing machine or is the most general if the proper use and maintenance of the use of the factory, and maintenance is important for prevention of equipment problems,

1. Maintenance steps: First, replace the hydraulic oil, then open all the ducts, insert the air pressure of the blower into the blower, clean the inner cavity of the hydraulic universal test machine, and clean the waste oil and dirt inside.

1 maintenance steps: firstly, the hydroulic oil to change, and then all tracheal Tongluo allopen, the pressure of the air blower is inserted into the blower, cleaning of the inner climate of hydroulic universal testing machine, so that the inside of waste oil and dirty things clean.

http://www.hssdtest.com/