Company News
Introduction to LC-2 hammer impact test machine
Release time：2018-11-23 source：Jinan Hengsi Shanda Instrument Co., Ltd. Browse：
Technical requirements
Hammer weight: 0.25kg-15kg
Hammer head curvature radius: R5, 10, 12.5, 30, 50, 120wait
Impact height: 100--2000mm
Specifications of test pieces:ф10-ф400mmф10-ф1000mm
Technical parameters:
Hammer weight: 0.25kg--16kg
Curvature radius of hammer: R5, 10, 12.5, 30, 50, 120etc
Impact height: 100--2000mm
Sample size:ф10-ф400mmф10-ф1000mm
LC-2 hammer impact tester |
 |
The hammer impact tester is suitable for various pipes (such as water supply pipes, drainage pipes, low-pressure water supply pipes, core foam pipes, polypropylene (PP) The measurement of impact toughness of pipes, plastic pipes for communication pipelines, etc.) can also be used for hard plastic sheets.Products comply with industry standards JB/T9389Technical conditions of the falling hammer impact test machine, meet GB/T5836.1, GB/T10002.3, GB/T16800, GB6112, ISO4422Standard requirements for testing methods. |
- Previous article：Working principle of impact testing machine
- Next article：A brief discussion on the scratch test machine of artificial board MHH-5
Recommended productsPRODUCTS
