5 steps for cleaning and maintenance of the test machine

Long runTesting machine, during the process, there will be wear and tear, or there will be no timely cleaning and maintenance after use, resulting in unnecessary errors. The following are listed by Jinan Hengsi Evergrande Instrument Co., Ltd.5point:

1, The fixtures equipped with the machine should be coated with anti-rust oil for storage;

2, Due to hydraulic universalMaterial testing machineThe jaws are often used, which are easy to wear. When there is too much oxide scale, it is easy to cause damage to the small piston and oil leakage. Therefore, the jaws should be cleaned frequently and kept clean (clean after each test);

3, The sliding surface of the inlay plate and the dovetail groove surface on the lining plate should be kept clean, and a thin layer should be applied regularlyMoS2(Molybdenum disulfide) grease;

4, regularly check the screws in the jaw area, and if they are found to be loose, tighten them in time;

5, regularly check the transmission status of the sprocket. If you find loose, please re-tension the tensioner;

MoreTesting machineAll information is in Jinan Hengsi Shanda Instrument Co., Ltd.