7 points of precautions for multifunctional electronic tension testing machine

For multifunctional electronicsTension tester, daily maintenance is very necessary for work. However, as the inspection of non-metallic materials, staff should conduct detailed inspections every week, light-touch hood internal dust and fibers.

1, Before testing the test machine, the system must be preheated20More than minutes, so that the temperature float has little impact.

2, The oil used for the buffer should be kept clean, and should be replaced immediately when the oil level is less than two-thirds of the barrel depth.

3,Impact testing machineBefore starting the machine, check whether lubricating oil should be added to the frictional moving parts.

4, Before adding the test piece, the brake handle must be stuck, and then release it after adding the test piece.

5, Refueling is not allowed on the main bearing of the dynamometer. The surface of the friction wheel in the gearbox must not be refueled or oil stains splashed. The friction surface should be clean and the inclined block on the swing arm must not be violently impacted.

6, After the test is completed, after the power is cut off, the test machine will be cleaned and protected in a timely manner.

7, carry out tension machines on average every month2Second maintenance

above7pointTension testerNotes I hope to help the majority of customers. For more information on testing machines, please consult our company.