Company News
Frequency regulation parameter setting steps of vibration test machine
Release time：2018-11-23 source：Jinan Hengsi Shanda Instrument Co., Ltd. Browse：
Vibration test machineThe parameters are modified according to the following "Setting Steps":
1. CD000=The frequency to be set (1~600HZ)
2. CD064 = Number of runs (then total time = time executed once × number of runs)
3. CD065=0, CD041=1, CD012=CD013=0.1 (set the boot value before frequency modulation)
4. CD087 = time to execute once (0~65000 seconds)
5. CD020 to CD027=0, CD080 to CD086=0, CD088 to CD094=0, CD098 to CD105=0
6. Adjust the amplitude size according to "VI. Amplitude Modulation Control Instructions"
7. Press the RUN key to perform vibration test, and press the red key to stop performing the test.
MoreMaterial testing machineAll in Jinan Hengsi Shanda Instrument Co., Ltd.
Recommended productsPRODUCTS
