Detailed explanation of 7 characteristics of spring material torsion test machine

Jinan SpringMaterial torsion test machineThe production is developed and sold based on the performance of the spring. It is often used to measure the torsion spring, worm spring, and the torsion angle of friction mechanism and other materials. The following content is an introduction to the characteristics of the spring torsion test machine:

1. You can choose whether you want to have no operation automatic shutdown function. The time can be set (1-60 minutes), and the default is off;

2. It has peak-holding function during test;

3. Store 99 sets of test data, which can be directly in thisMaterial torsion test machineCheck the stored data and delete it;

4. The three modes of real-time, peak and automatic peak can be switched at will;

5. Freely set the upper and lower limits, corresponding to the sound and light alarm;

6. Serial port output, can print 10 sets of stored test data and judgments of large value, small value, average value, qualified or unqualified (only for ATH-P, with printer);

7. Three measurement units: N (Newton), kg (kg), and Ib (pounds) are available for selection and mutual conversion;

MoreMaterial torsion test machineAll in Jinan Hengsi Shanda Instrument Co., Ltd.