HWQ-40C horizontal double-station reinforcement bending test machine

1. Overview:

This machine is developed in accordance with the provisions of national standards GB/T1499-1998, GB/T232-1999 and YB/T5126-2003. It can bend steel bars below HRB400 and below φ40. Its structural performance fully complies with the requirements of the test specifications. It adopts a supporting roller bending device. The supporting roller can be adjusted by the lateral auxiliary cylinder and is convenient for changing the bend center. It has reliable work and convenient operation.

Main features: The machine is equipped with a dual station. When the sample is cold bent, after one molding, a pressure combined force is applied to the auxiliary cylinder to bending the sample through interference, eliminating residual stress, and reaching that the bending angle after unloading is more accurate to equal 180°.

3. Technical parameters:

1. Bending diameter: Φ40mm 2. Forward bending angle: 0-180°

3. Dual station clamping rated pressure: 110KN×2

4. Bending test force: 160KN

5. Main piston working stroke: 270mm 6. Single stroke of double-station piston: 200mm

7. Piston travel speed: V1=80mm/min 8. Piston return speed: V2=160mm/min

9. Motor power: N=2.2KW 10. Operating voltage: 380V/220V

11. The machine weight: 550Kg 12. Appearance size: 1100x1100x1400mm