Understanding the relevant test standards of steel hammer tensile testing machines

Different modelsTension testerTo conduct tests on different materials, technical engineers from Jinan Hengsi Shanda Instrument Co., Ltd. gave a detailed description of the supporting equipment and various tests of the steel hammer tensile test machine:

For hammer handles equipped with handle sleeves, a 750N removal force is applied to the handle sleeve for a handle sleeve to perform a handle sleeve removal test. The handle sleeve must not be loose after the test.

Hardness meter: It is mainly used to detect the hardness of the hammer surface and hammer top of the steel hammer, the hardness of the adjacent parts of the hammer hole and hammer hole, etc. Common hardness meters that can be selected include Brinell, Richter, etc., and specific users need to customize them according to their own usage.

Secure the hammer body and hammer handle firmly toTension testerOn the other hand, a tensile load is applied to the handle side or a ballast load is applied to the hammer side. During the test, the corresponding load should be slowly applied at a certain speed to know the sample is disengaged.

The steel hammer body is vertically fixed to a special fixture, and gradually and slowly apply a load like the tail end of the hammer handle. When the length of the steel hammer is less than 250mm, a load is applied 10mm from the tail of the hammer handle.

Hammer handle strength, handle sleeve adhesion, and pull-off strength.

Octagonal hammer, road nail hammer, round head hammer, fitter hammer, flat tail hammer, car inspection hammer, geological hammer, rust hammer, welder hammer, claw hammer, carpenter hammer, mason hammer, mason hammer, electrician hammer, shoe hammer, decorative hammer, etc. This is mainly divided according to the purpose of the steel hammer.

MoreTension testerAll information is in Jinan Hengsi Shanda Instrument Co., Ltd.