Maintenance instructions for Hengsi Shanda tensile testing machine

Jinan Hengsi Shanda Instrument Co., Ltd. isTension testerOur company has been committed to the production line of test machines for many years, and its sales area covers the world, but there are inevitably some problems in the work of test machines. The following are some explanations for the maintenance of tensile test machines:

1,Sometimes after opening the computer software online, the message appears to be overloaded.

The solution is to check whether the communication line between the computer and the test machine is off; check whether the online selection sensor is selected correctly; check whether the sensor has been hit when a nearby test or operating the keyboard; check whether the calibration or calibration function of the software was used before a problem occurs; check whether the calibration value, calibration value or other information in the hardware parameters have been manually changed.

2,Check the damage to the fixture before doing the test

Before doing the test, please check the damage to the fixture. If the test machine fixture is used for a long time, the fixture will not be clamped. There are other reasons.

3, tensile testing machineThe mains power supply is not illuminated and cannot move up and down.

The solution is to check whether the power line connected to the test machine is normally connected; check whether the emergency stop switch is in a screw-up state; check whether the power voltage of the test machine is normal; check whether the fuse on the machine socket is blown, please remove the spare fuse and install it.

4,The main power supply of the tensile tester is powered but the equipment cannot move up and down.

The solution is to check whether the device cannot move after 15S (time), because the host needs to be self-checked, which takes about 15S time; check whether the upper and lower limits are in the right position and have a certain operating space; check whether the power supply voltage connected to the test machine is normal.

If there is any uncertaintyTension testerFor questions, please contact our online technicians to help you answer them.