7 points to pay attention to the use of the maintenance tensile test machine

Jinan isTension testerMost users will purchase testing equipment here for the production base. Therefore, our company's technicians have summarized the following 7 points for the maintenance of the tensile testing machine:

1. Before the test, the system must be preheated for more than 20 minutes, so that the temperature float has little impact.

2. The oil used for the buffer should be kept clean. If the oil level is less than two-thirds of the barrel depth, it should be replaced immediately.

3. Before starting the machine, check whether lubricating oil should be added to the frictional moving parts.

4. Before adding the test piece, the brake handle must be stuck, and then release it after adding the test piece.

5. Refueling is not allowed on the main bearing of the dynamometer. The surface of the friction wheel in the gearbox must not be refueled or oil stains splashed. The friction surface should be clean and the inclined block on the swing arm must not be violently impacted.

6. After the test is completed, after the power is cut off, the test machine will be cleaned and protected in time.

7. Average monthlyTension testerPerform 2 maintenance.