Current location：front page >> Product Center >> Pressure tester series >> Fully automatic pressure tester

Microcomputer controlled constant stress pressure tester (300KN)

Product Classification： Fully automatic pressure tester

Product Overview：The functional use of the microcomputer-controlled constant stress pressure tester 300KN is mainly used for the compressive strength test of cement sand, carbon materials, petroleum proppants and other materials. It can also be used for the mechanical properties of other materials, and meets the requirements of GB/T2611, GB/T17671, GB/T16826, GB/T50081 standards.

1. Functional use of microcomputer-controlled constant stress pressure tester (300KN)

This machine is mainly used for compressive strength tests of cement sand, carbon materials, petroleum proppants and other materials, and can also be used for mechanical properties tests of other materials, complying with the requirements of GB/T2611, GB/T17671, GB/T16826, GB/T50081 standards.

two,Microcomputer controlled constant stress pressure tester (300KN)Product Description

The test machine uses a high-performance AC servo motor to drive the precision lead screw operation. The high-performance control system can realize automatic control and arbitrary programming control in various modes such as constant-rate stress, constant-rate displacement, and constant-speed deformation;

The test machine host uses a down-mounted host, which makes the sample clamping quick. The whole machine has high strength and good fatigue resistance;

Since the AC servo motor loading does not overheat, it can meet the working requirements of 7×24 hours safety protection device:

three,Microcomputer controlled constant stress pressure tester (300KN)Technical parameters

(I) Host parameters:

Testing force: 300KN;

Host structure: floor-standing model;

Maximum compression space (mm): 200;

Space adjustment method: ball screw adjustment;

Effective spans on the left and right: 210mm;

Pressure plate stroke: 80mm;

Upload plate size (mm): φ120;

Down pressure plate size (mm): φ160;

Speed parameters (mm/min): 80;

(II) The whole machine parameters:

Host size (mm): 1120*480*1260;

The weight of the whole machine (kg): 300;

Supply voltage: single-phase 220v/50HZ ~60HZ

Previous article：Microcomputer-controlled geotight tester
Next article：Manual wire repeat bending test machine

Recommended informationNEWS

[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine
[2022-07-13]About how to choose a high-precision material testing machine
[2022-07-08]Impact sample notch hydraulic pulling bed (US standard)