Characteristics of pointer type push and pull force gauge and precautions for use

The pointer type push-pull force gauge has the characteristics of high resolution, high accuracy, two measurement units, N and Kgf at the same time, good operability, and better accuracy with the test machine. Regarding the use of pointer tension gauge, most pointer tension gauge users only know one test method. Today, let me introduce to you the characteristics of pointer push and pull gauge and the precautions for use.

1. Characteristics of pointer type push and pull force gauge

1. Pointer-type display, convenient, accurate and high accuracy

2. Two units (N, kgf) double display, no unit conversion is required

3. Free switching between peak holding and load real-time display, easy to use

4. Handheld design, small size and simple operation, can be installed on various workbenches, and can be equipped with various fixtures to facilitate testing of various products.

5. Reliable and exquisite packaging, easy to transport, store and maintain, one year warranty, lifelong maintenance

2. Precautions for using pointer push and pull force gauge

1. Regarding pointer type push-pull gauge cleaning: Keep the tension gauge clean frequently to prevent water, dust, corrosive gases, etc. from invading the machine to avoid affecting the normal operation of the tension gauge.

2. Regarding cleaning the machine case: When the surface of the machine case is stained with dirt or dust, please wipe it with a wrung wet cloth. Do not use liquid or spray cleaner to avoid corroding the surface of the machine case and flowing into the machine to corrode the mechanical devices.

3. Regarding tension gauge shockproof: Please place the machine in a stable place to prevent damage caused by collision, scratches or falling.

4. Regarding the test environment: Please use it in the specified ambient temperature (10℃~40℃) and relative humidity below 80%. There should be no vibration or other interference sources affecting the test results. Otherwise, the test results may not meet the required accuracy level or the instrument failure.

5. Regarding pointer type push-pull meter storage: The tension meter packaged into a box should be stored in a ventilated, dry, and corrosion-free place. The stacking height should not exceed ten layers, the warehouse temperature (-20~+50)℃, and the relative humidity should not exceed 90%.

6. About transportation: A tension gauge packaged into a box can be transported by any means of transportation under the direct influence of rain, snow, violent impacts, etc.

7. Regarding the unexpected failure of pointer type push and pull gauge: When the following situations occur, please entrust the maintenance work to the designated maintenance center:

(1) Liquid invades this machine;

(2) When the instrument is exposed to rain or water;

(3) Operate according to the instructions but fail to work normally or the test accuracy is not up-to-date;

(4) When the instrument is dropped or the fuselage is damaged;

(5) When the performance of the instrument changes significantly.

After understanding the characteristics of the pointer type push-pull gauge and the precautions for use, the operator must use it in accordance with the procedures and specifications of the instructions when using the press tester. Otherwise, it is easy to cause dangerous situations such as machine failure and personnel injury. If you have any questions during use, you can call our service hotline through the web page, and our technicians will answer them one by one. Welcome to call and support!