Hello, welcome to visitJinan Hengsi Shanda Instrument Co., Ltd.
English en
Some of you are interested in：
Current location：front page >> Product Center >> Impact testing machine series >> Impact testing machine

Semi-automatic impact testing machine (300J/500J)

Semi-automatic impact testing machine (300J/500J)

Semi-automatic impact testing machine (300J/500J)

Product Classification： Impact testing machine
Product Overview：This series of impact testing machines is used to measure the properties of metal materials to resist impact under dynamic loads, thereby judging the quality status of the materials under dynamic loads. This machine is a semi-automatic control test machine, with simple operation and high working efficiency, and controls swing, impact and discharge electrical appliances. It can use the remaining en

Semi-automatic impact testing machine (300J/500J)


Main introduction:
This series of impact testing machines is used to measure the properties of metal materials to resist impact under dynamic loads, thereby judging the quality status of the materials under dynamic loads.
This machine is a semi-automatic control test machine, which has simple operation and high working efficiency. It controls the swing, impact and discharge electrical appliances. It can use the remaining energy after the sample is broken to automatically prepare for the next test. It is especially suitable for laboratories that perform continuous impact tests and metallurgy, machinery manufacturing and other industries that perform large amounts of impact tests. In accordance with the national standard GB/T3808-2002 "Inspection of Pendulum Impact Test Machine", the impact test of metal materials is carried out in accordance with the national standard GB/T229-2007 "Metal Materials Shabi Pendulum Impact Test Method".
Technical Features
1. The main unit of the test machine is a single-support column structure, cantilever hanging pendulum method, and the pendulum hammer body U-shaped;
2. The impact knife is installed and fixed by screws, making it easy to replace;
3. Sample simple-supported beam-type support;
4. The host is equipped with a safety protection pin and is equipped with a safety protection net;
5. The test machine is semi-automatically controlled, and the swing, hanging, impact and release are all electrically controlled. It can use the remaining energy after the sample is broken to automatically swing and prepare for the next test. It is especially suitable for laboratory rooms that perform continuous impact tests and metallurgy, machinery manufacturing and other departments that perform large amounts of impact tests;
6. The test machine complies with the national standard GB/T3803-2002 "Inspection of Pendulum Impact Test Machine", and conducts impact tests on metal materials according to the national standard GB/T229-2007 "Metal Shabby Notch Impact Test Method".
Main technical parameters:
model
JB-300B
JB-500B
Display method
Dial display
Dial display
Impact energy
150/300J
250/500J
摆轴中心至冲击点距离
750mm
800mm
Shock speed
5.2m/s
5.4 m/s
Pendulum pre-scaling angle
150°
Sample support span
40mm
Claw rounded corners
R1-1.5mm
Impact blade rounded corner
R2-2.5mm, R8±0.05mm
Sample size
10 (7.5, 5, 2.5)mm×10mm×55mm

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)


Recommended informationNEWS

Friendly links：