Gate terminal tensile testing machine

1. Basic functions
Basic functions of the test machine:

1. The acceleration of the loading test force is adjustable, which should meet the needs of Wuji speed regulation within the range of 0.01-1000mm/min;
2. The tension value can be preset, the connected terminals and wiring harness are kept for 1 minute, and no sliding occurs during the test (the load rate does not exceed 10N/(s.mm²)), or the maximum tension value when the terminals and wiring harness are deformed (the maximum tension can be recorded);
3. It is necessary to include terminal fixtures (satisfies that our terminal form OT/DBV/elpress terminals);
4. The test control software of the test machine must be able to generate word or Excel reports and generate linear curves of the test process that we can analyze;
5. If the maximum load exceeds, it can be automatically shut down (with its own limit protection function, it will automatically shut down during overcurrent, overvoltage, and overload, and there is an emergency thunder button);
6. During the monitoring and testing process, the test control software stores energy in real time to display the test parameters;
7. According to our needs, select the load-deformation, load-time, load-displacement, displacement-time, deformation-time curves and test data for printing;

1. Test force X value range: 20N≤X≤10KN;
2. Structural form: door type;

1. Test force measurement range: 20N-10KN);
2. Test force accuracy: <±1N
3. Displacement resolution: 0.01mm;
4. Test speed range is 0.01-1000mm/min;
5. Stretching space: >500mm