Maintenance method of tension machine

For multifunctional electronicsTension machine, Microcomputer controls electronic tensioner, we should pay attention to the following points when maintaining it:
1. Before the test, it is necessary to ensure that the system is preheated for more than 20 minutes, so that the temperature float has little impact.
2. The oil used for the buffer should be kept clean. If the oil level is less than two-thirds of the barrel depth, it should be replaced immediately.
3. Before starting the machine, check whether lubricating oil should be added to the frictional moving parts.
4. Before adding the test piece, the brake handle must be stuck, and then release it after adding the test piece.
5. Refueling is not allowed on the main bearing of the dynamometer. The friction wheel surface in the gearbox must not be refueled or oil stained. The friction surface should be clean and the inclined block on the swing arm must not be violently rushed.hit.
6. After the test is completed, after the power is cut off, the test machine will be cleaned and protected in time.
7. The tensioner is maintained twice a month on average.
Jinan Hengsi Instrument Co., Ltd. specializes in selling tensile machines. If you need it, please contact us.

Company name: Jinan Hengsi Shanda Instrument Co., Ltd.
Tel: 0531- 66715606
Fax: 0531-81901323
Mobile phone: 15910081986
Q Q: 782205571
Email: hssd1986@163.com
Website: http://www.hssdtest.com
Address: No. 188, Xiaoqing Hebei Road, Jinan City