Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine
Digital display simple suspension combined impact test machine
Digital display simple suspension combined impact test machine
Product Classification： Non-metallic material impact test machine
Product Overview：This machine can combine simple-supported beams (including pipe tests) and cantilever beam impact test machines within the following energy ranges. If a single or some energy machine is selected, it can achieve a full-energy combined impact test machine without any obstacles. This series of combined impact testing machines has the distinctive characteristics of one machine with multiple energy, wi
introduce:
This machine can test simple-supported beams (including pipe materials),Cantilever beam impact test machineAny combination can be performed within the following energy ranges. If a single or some energy machine is selected, it can achieve a full-energy combined impact test machine without any obstacles. This series of combined impact testing machines has the distinctive characteristics of one machine with multiple energy, wide range of use, easy operation, and high product accuracy. They are a must-have comprehensive testing instrument for domestic production quality inspection departments, colleges and universities, scientific research institutes and various plastic production enterprises.
standard:
Comply with ISO 179, IS0 180, GB/T 1043, GB/T 1843, JB/T 8761, JB/T 8762, GB/T 2611 and other standards
The total energy of simple supporting beam is: 0.5, 1, 2, 4, 5, 7.5, 15, 25, 50 (J)
The total energy of the cantilever beam is: 0.6, 1, 2.75, 5.5, 11, 22 (J)
Technical performance and parameters:
XJJ-50 | XJU-22 | |
speed | 3.8 m/s | 3.5 m/s |
Pendulum energy | 7.5, 15, 25, 50J | 5.5, 11J, 22J |
Pendulum angle | 160° | 160° |
Blade rounded corner radius | R=2±0.5mm | R=0.8±0.2mm |
Claw rounded radius | R=1±0.1mm | R=1±0.1mm |
Distance between jaw support lines | 40 mm, 60 mm, 70 mm, 95 mm, | Wedge-shaped jaws, universal |
Impact blade angle | 30°±l° | 30°±l° |
Pendulum air impact | 0.5% | 0.5% |
Recommended informationNEWS
- [2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
- [2022-08-12]Testing method of metal rods by testing machine
- [2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
- [2022-08-04]How to install a clamp to save effort
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine
- [2022-07-15]Handling of displacement system failure of tensile test machine
- [2022-07-15]Low temperature impact tester
- [2022-07-15]How to choose a horizontal tensile tester and what to note during experiments