Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine

XJUS series digital explicit cantilever beam impact test machine

Product Classification： Non-metallic material impact test machine

Product Overview：This series of digital impact testing machines are mainly used to determine the impact toughness of non-metallic materials such as hard plastics, reinforced nylon, fiberglass, ceramics, cast stone, electrically insulating materials. It is an ideal testing equipment for the chemical industry, scientific research institutions, colleges and universities, quality inspection and other departments.

XJUS series digital explicit cantilever beam impact test machine

introduce:

This series of digital displaysImpact testing machineIt is mainly used to determine the impact toughness of non-metallic materials such as hard plastics, reinforced nylon, fiberglass, ceramics, cast stone, electrically insulating materials. It is an ideal testing equipment for the chemical industry, scientific research institutions, colleges and universities, quality inspection and other departments.

Features:

1. This series of impact testing machines adopts PLC control to improve the control accuracy and stability of the product, and can automatically correct the energy loss caused by friction and wind resistance.

2.2. This series of impact test machines use LCD LCD display to display the test results, making the reading more intuitive and simple and fast.

XJU series cantilever beamImpact testing machineThe main technical parameters are fully in line with the regulations of IS0180, GB/T 1843, GB/T 2611, JB/T 8761

Technical parameters:

1. Main technical indicators

	XJUS-5.5 Series	XJUS-22 series
Shock speed	3.5 m/s
Pendulum energy	1J, 2.75J, 5.5J	11J, 22J
Pendulum torque	Pd1==0.53590Nm Pd2.75=1.47372Nm Pd5.5=2.94744Nm	Pd11=5.8949Nm Pd22=11.7898Nm
Strike center distance	335mm
Pendulum angle	160°
Blade rounded corner radius	R=0.8±0.2mm
Distance from the blade to the jaw	22±0.2mm
Impact blade angle	75°
Pendulum air impact energy loss	1J: 2%; 2.75J, 5.5J: 1%	0.5%

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：XJU series cantilever beam impact test machine
Next article：Digital display simple suspension combined impact test machine

Recommended informationNEWS

[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine
[2022-07-13]About how to choose a high-precision material testing machine
[2022-07-08]Impact sample notch hydraulic pulling bed (US standard)
[2022-07-08]Wide application and precautions for stripping test machines
[2022-07-08]Common problems and solutions during the use of universal thermal insulation test machine
[2022-07-08]Test method for rock wool shear strength