5 Simple Operations of Impact Testing Machine

I've introduced it beforeImpact testing machineI believe that the daily problems of electric bed pulling have also been learned in detail about the work flow of the impact test machine. The following are the operating steps and related precautions of the impact test machine provided by Jinan Hengsi Shanda Instrument Co., Ltd., and I hope to help in my work.

1.Turn on the power switch of the body, hold the operator to make the pendulum empty (no sample placement), check whether the passive needle of the dial points to zero. If it does not point to zero, adjust the pointer position so that the pointer is zero when the empty point is played.

2.Use wooden blocks to place the pendulum on the edge of the support, use the notch to center the sample to make the impact sample notch at the center of the span of the support, and the notch surface is on the impact tension side.

3.Before the test, replace the appropriate pendulum with the blow energy requirement (the blow energy of the big pendulum is300J, the pendulum is150J).

4.Press the "Start" button to lift the pendulum, and after it reaches the set height on the spot and stabilizes, clear all obstacles in the blow ring of the pendulum shelves, and turn the dial pointer to the strike energy scale.

5.Press the "Impact" button and knock the sample off by dropping the hammer. When the pendulum swings back, press the "Brake" button. When the pendulum stops swinging, record the impact energy. After the test is over, turn off the operator power supply and the impactor power supply, and hang the operator back to its original position.

Notes:

(1)The pendulum is not allowed to be raised and bent over to place the sample; during the test, personnel are allowed to move inside the pendulum swing plane.

(2)The sample breaks the pendulum and swings back and forth, press "brake" and cannot use your hands to stop the pendulum still in the swing.

MoreImpact testing machineAll test methods are available in Jinan Hengsi Shanda Instrument Co., Ltd.